PET bottle rinsing machine/New glass bottle cleaning machine
Except for the down framework, the transmission parts, and some parts that must be made of special materials. Other spare parts are made of stainless steel 304.
The roller bearing is made of stainless steel, the sealing ring is made of EPDM material, and the plastic is made of UMPE.
The gripper is made of stainless steel, and the position where hold the bottleneck is also made of stainless steel, compared with the traditional rubber gripper, it is much more hygiene, and durable, and has no quick-wear parts, the screw parts of the bottleneck can avoid being polluted by the rubber gripper.
The gripper is equipped with a high-efficient spray nozzle, it can develop to any position of the inwall of the bottle, and can save rinsing water. There is a cover above the spray nozzle that can prevent water from spilling, and there are regulatory recycle slots and recycle pipes under the nozzles.
Rinsing time can be guaranteed for 4 seconds.
By adjusting the height of the rotary parts to adapt to different bottle heights.
The motivation is derived from the driven system in the framework passed by gear.
The supply of rinsing water is controlled by a solenoid valve.
Machine parameters:
| A number Of Bottle Flushing Heads: |
16 Heads -30 Heads |
| Production Capacity: |
3000, 4000, 5000 Bottles/Hour, Customized According To Requirements. |
| Applicable Bottle Diameter: |
Customized According To Requirements. |
| Applicable Bottle Height: |
Customized According To Requirements. |
| Clean Compressed Air Pressure: |
0.2-0.4Mpa |
| Water Pressure: |
0.2 Mpa |
| Water And Air Consumption: |
About 1.2 Cubic Meters / Hour |
| Power Supply: |
380V 50/60Hz |
){kind=link}